Articles in this section

How to Configure VLAN in SolusVM 2?

Shyva Dev
Updated

Question

How to Configure VLAN in SolusVM 2?

Answer

  1. Verify that the VLAN is properly configured on the Compute Resource.
  2. Create a VLAN within SolusVM:
    1. Navigate to Network > VLAN > Add VLAN
    2. Сomplete the required fields according to the VLAN configuration on the Compute Resource.
  3. Modify the IP block settings to assign the VLAN accordingly.

Port Type

OVS Config Example

Incoming Untagged → VLAN

Incoming Tagged

Outgoing Untagged

Outgoing Tagged

Access

tag=10

VLAN 10

Dropped

VLAN 10

—

Trunk (no native)

trunks=10,20 vlan_mode=trunk

Dropped

VLAN 10,20 only

—

VLAN 10,20

Trunk with native (untagged)

tag=10 trunks=20,30 vlan_mode=native-untagged

VLAN 10

VLAN 20,30

VLAN 10

VLAN 20,30

Trunk with native (tagged)

tag=10 trunks=10,20,30 vlan_mode=native-tagged

VLAN 10

VLAN 10,20,30

—

VLAN 10,20,30

 

Was this article helpful?

Comments

0 comments

Please sign in to leave a comment.