How to restrict an access for the user based on the specific IP address in SolusVM 1 and 2?

Shyva Dev

Updated July 13, 2026 15:54

Applicable to:

SolusVM 1
SolusVM 2

Question

How to restrict an access for the user based on the specific IP address in SolusVM 1 and 2?

Answer

IP could be changed

In some cases, the IP addresses of the Technical Support team may differ from those specified below. In such cases, the exact IP address to allow will be specified additionally in the ticket.

Access to the SolusVM UI can be limited for a specific user by following the steps outlined below:

For SolusVM 1

Login to UI
Navigate to Configuration > AdminCP Whitelist > Add IP in Whitelist
Specify the allowed IP addresses from the list below

For SolusVM 2

Login to UI
Navigate to Access > Users
Press Edit to edit the user settings
Specify the allowed IP addresses from the list below in the Allowed IPs field

Note: If remote access to the server is limited with firewall, please make sure that it is allowed from SolusVM Support IP addresses:
104.30.179.199
104.30.174.141
2a09:bac0:1001:68e::/64
2a09:bac0:1000:16c2::/64
195.214.233.0/24
91.204.24.0/22